KDM6pp - Powerspark Electronic Ignition Kit (Positive Earth) for Lucas DM6, DMB6 and DMBZ6A Distributor
This Powerspark Electronic Ignition Kit is designed to replace the points and condenser inside the Lucas DM6 and DMBZ6A Distributor
The DM6 and DMBZ6A is a 6 cylinder distributor and can be found in classic Austin, Austin Healey, Humber, Jaguar, and Rover cars amongst others.
Please note this is a POSITIVE EARTH ignition kit for positive earth vehicles.
Iconic 6 cylinder classic cars known to use the Lucas DM6 and DMBZ6A Distributor include the Aston Martin DB4, DB5, DB6, Austin Healey 100-6, 3000 MK1 and 2, Jaguar XK150, E Type and XKE as well as the Humber Super Snipe.
This Powerspark Electronic Ignition Kit is suited to the following vehicles:
Avis TC108G Saloon Graber Body, TD21 Saloon, Coupe
Armstrong Siddeley Sapphire, Sapphire 236, 346 Saloon & Limousine
Austin A90, A95 Westminster, Countryman (1955-59), A99, A105, A135 Princess, 3, 10 Litchfield (1935), Princess 3.0 (1960),
Austin Healey 100-6
Aston Martin DB4 6 Cylinder, DB5 6 Cylinder, DB6 6 Cylinder
Daimler Conquest (1955-58), Empress (1955), 560 Majestic (1959), 60 One O Four (1956-7) Regency 3.5 Litre, Litre (1955), Regina Limousine (1955)
Faithorpe Zeta (and more)
Ford Zephyr and Zodiac (1958-59), Zodiac MK1, MK2
Humber Super Snipe, Super Snipe Series I , Series II 3 Litre, Imperial HC , LC
Jaguar E Type (1961-63, MK VIII, MK IX (1957) MK X (1962), XK150 (1958-60) MK2 3.4 & 3.8 litre (1959-60)
Laguna Rapide (1961)
MorrisIsis Saloon, Traveller (1956-67)
Rover 75, 90 (1954-59), 3 Litre (1959)
Standard Vanguard Luxury Six Saloon & Estate (1962-63)
Vanden Plas Princess 3.0 (1961)
Wolseley Six Ninety Four (1954) Six Ninety Nine (1961)
- Easy to install
- Replaces troublesome points and condenser
- No visible difference in your engine bay
- Improved starting
- Improved performance
- Improved durability
- Maintenance free
- To be used with a coil resistance above 1.5 ohms only
- MUST be used with silicone HT leads, NOT COPPER. Click here to browse our range of HT leads.
Powerspark Electronic Ignition explained in more detail:
The kit uses a simple magnetic trigger and optimises dwell to provide a reliable and consistent spark across the rev range. It is easy to install and maintenance free.
Each kit comprises a baseplate with electronic module, trigger ring and all wiring. The new electronic baseplate mounts exactly where the points and condenser baseplate sat. The kit connects directly to the coil using the wires provided, red to the positive side and black to the negative side. The ignition kit will automatically shut down if the ignition is left switched on without the engine running to prevent component damage.
Powerspark Electronic Ignition Kits are designed to work with a coil resistance above 1.5 ohms, typically 3.0 ohms. Some performance coils operate at a lower resistance and will need the High Energy electronic ignition kit.
Full fitting instructions are included with your kit, and plenty more instructions can be found on our blog.
Watch our 'how to fit a Powerspark Electronic Ignition Kit' video here:
1 Review Hide Reviews Show Reviews
Marvellous piece of equipment. It saves cleaning points.