K4 & R2 - Powerspark Electronic Ignition Kit (Negative Earth) for Lucas 45D 43D & 59D Distributor
This electronic kit is designed to replace the points and condenser inside a Lucas 43D, 45D or 69D distributor, giving you electronic ignition at the turn of your key.
The Lucas 45D, 43D and 59D and Distributor was fitted to many classic vehicles from Austin, Hillman, Land Rover, MG, Morris, Reliant, Sunbeam, Triumph, Vanden Plas and Wolseley as well as European marques such as Innocenti, Talbot (Matra)
Fitment Guide for This Electronic Ignition Kit:
|Allegro||1.1 / 1.3 /1.5/1.7|
|LAND ROVER||LAND ROVER Series III||1982-1984|
|LAND ROVER||LAND ROVER Series III||1977-1981|
|SUNBEAM||Rapier - H120||1973-1976|
|TALBOT||Talbot Avenger 1.6||1973-1976|
This Powerspark Electronic Ignition Kit contains everything needed to convert your car from points & condenser to electronic ignition.
Fitting is easy and instructions are included with the packaging, as well as available online and in the video below.
- Easy to install
- Replaces troublesome points and condenser
- No visible difference in your engine bay
- Improved starting
- Improved performance
- Improved durability
- Maintenance free
- To be used with a coil resistance above 1.5 ohms only
- MUST be used with silicone HT leads, NOT COPPER. Click here to browse our range of HT leads.
Powerspark Electronic Ignition explained in more detail:
The kit uses a simple magnetic trigger and optimises dwell to provide a reliable and consistent spark across the rev range. It is easy to install and maintenance free.
Each kit comprises a baseplate with electronic module, trigger ring and all wiring. The new electronic baseplate mounts exactly where the points and condenser baseplate sat. The kit connects directly to the coil using the wires provided, red to the positive side and black to the negative side. The ignition kit will automatically shut down if the ignition is left switched on without the engine running to prevent component damage.
Powerspark Electronic Ignition Kits are designed to work with a coil resistance above 1.5 ohms, typically 3.0 ohms. Some performance coils operate at a lower resistance and will need the High Energy electronic ignition kit.
Full fitting instructions are included with your kit, and plenty more instructions can be found on our blog.
Watch our 'how to fit a Powerspark Electronic Ignition Kit' video here:
10 Reviews Hide Reviews Show Reviews
Fitting this is not easy if you aren't a competent mechanic etc! Beware of the suggestion that it's simple, straightforward or just two wires etc. You will need some mechanical competence and equipment and the suggestion that this is straightforward or easy simply sin't the case. I have an MG Midget which has about twice as many wires in various places as the instructions and videos suggest! I can't comment on the kit itself because I need a garage to fit it!
Great service, delivery to Canada in only six days.Great produce easy to fit and time in. Will deal with you again for sure.
First one failed just after warranty. no good will So I fitted new one and OK so far. But I question whether it is superior to Luminition In saying that I have fitted this kit to my 1954 type C Jaguar and it has really worked fine. better than substandard new contacts and condensers from motor factors
Nice and easy to fit with good instructions. Works well car running well.
reliably and fast and uncomplicated
Best choice I had. Only 15 min for installation and engine starts fine
I order a few of these on behalf of a Mini specialist in Sri Lanka, he is very pleased with the quality of the product, and the way it is presented, When I contact Powerspark who ever I speak to are always very helpful.
Easy fit and worked first time. Did need slightly longer screws.