Powerspark Lucas 23D Distributor Ford Geared for Sidevalve & Consul Engine
The Lucas 23D Distributor is a non vacuum advance model, used in cars from the 1960s to mid 1970s.
It works with many models and can be found in some early Hillman vehicles, pre-1974 4 Cylinder Land Rovers, all models of 4 Cylinder MGA and others.
When fitted with a Ford specific drive gear it is used in Ford Sidevalve engines.
Our Powerspark 23D is available as standard points or with built in electronic ignition.
This is a brand new quality product, reproduced accurately from original castings. The distributor is complete with everything you need.
Points models come with a brand new points set. Electronic Ignition models replace the points set with our patented Powerspark Electronic Ignition module.
Powerspark Electronic Ignition is the original electronic ignition conversion for classic cars, giving reliable starting and hassle free ownership.
We offer a choice of negative or positive earth electronic ignition.
About Points, Electronic and High Energy Distributors from Powerspark Ignition:
Traditional Points Distributors:
The traditional ignition system used in most cars up until the 1980s.
- To be used with a Standard or Sports ignition coil, resistance reading above 1.4 ohms. OK to use copper HT Leads.
Sports Electronic Ignition Distributors:
Looks like an original points distributor but contains an electronic ignition module that uses a magnetic pickup instead of contact breaker points.
- To be used with a Standard or Sports ignition coil, resistance reading above 1.4 ohms. Not suitable for use with copper HT Leads
High Energy Electronic Ignition Distributors:
Looks like an original points distributor but contains an electronic ignition module capable of 3x the spark of sports electronic ignition.
- To be used with a High Energy ignition coil, resistance reading below 1.4 ohms. Not suitable for use with copper HT Leads