D13H_Col - Powerspark Ford Cologne V6 Electronic Distributor (Bosch)High Energy Version
Available by popular demand, we are now able to offer a direct ‘plug and play’ electronic distributor for the Ford Cologne V6 engine. Prior to the launch of this electronic distributor, buyers looking for a new distributor for a Cologne engine would need to opt for an expensive refurbishment of their existing distributor.
This is a direct replacement for the original Bosch unit, complete with Powerspark electronic ignition.
Fitting is simple, this items ready to go out of the box.
Fitment includes and is not limited to:
Ford Capri Coupe 2.3 V6, 2.6 V6, 2.6 RS V6
Ford Cortina 2.3 V6
Ford Granada Mk2 2.3 V6 and 2.8 V6
Ford Scorpio 2.8 V6
Ford Sierra 2.8 V6 XR4x4 up to 1987
Reliant Scimitar 2.8 V6 (1979 onwards)
TVR 280i/Tasmin 2.8 V6
TVR S1 2.8 V6
If you are unsure about fitment on your vehicle, please contact us.
Were you looking for a distributor for the Ford Essex V6 engine? Click here
About Points, Electronic, High Energy and Positive Earth Distributors from Powerspark Ignition:
Traditional Points Distributors:
The traditional ignition system used in most cars up until the 1980s.
- To be used with a Standard or Sports ignition coil, resistance reading above 1.4ohms. OK to use copper HT Leads
Standard Electronic Ignition Distributors (often known as Sports Electronic):
Looks like an original points distributor but contains an electronic ignition module
- To be used with a Standard or Sports ignition coil, resistance reading above 1.4ohms. Not suitable for use with copper HT Leads
- Available as Negative Earth or Positive Earth for most of our distributors and ignition kits.
(If the product does not state whether it is Positive or Negative Earth in the listing then is Negative Earth.)
High Energy Electronic Ignition Distributors:
Looks like an original points distributor but contains an electronic ignition module capable of 3x the spark of standard electronic ignition.
- To be used with a Standard or Sports ignition coil, resistance reading less than 1.4ohm. Not suitable for use with copper HT Leads