L2_Midget_Blue - MG Midget MK3 & MK4 4 Cylinder Performance Double Silicone HT Leads 8mm Blue
Mk1 and MK2 cars used a side entry distributor cap which would have HT leads with no terminals to the distributor cap, as these would push in and secure with a screw underneath. These are our L7 HT Leads.
MK3 and MK4 cars used a top entry distributor cap which has push on terminals. These are our L2 HT Leads.
See table below:
MG Midget Mk1 (1961-64) L7 leads for side entry screw fit cap
MG Midget MK2 (1964-66) L7 leads for side entry screw fit cap
MG Midget MK3 (1966-74) L2 leads for top entry push on cap
MG Midget MK4 (1974-80) L2 leads for top entry push on cap
The MG Midget used the Lucas 25D and 45D Distributors, however a 45D can be used for all years.
It is important that you select the correct HT Leads for your Midget. A 25D can be replaced with a 45D, so if you want to use a 45D with your MK1 or MK2 then please select the MK3 and M4 specification HT Leads.
Specification of these leads:
King Lead 330mm (angle to straight connection)
Cylinder 1 165mm (straight at the spark plug, angled at the cap)
Cylinder 2 165mm (straight at the spark plug, angled at the cap)
Cylinder 3 165mm (straight at the spark plug, angled at the cap)
Cylinder 4 200mm (straight at the spark plug, angled at the cap)
About our HT Leads:
Our HT leads use double silicone insulation surrounding a carbon ferroflex core for maximum spark transfer and minimal power loss. This combination gives you a strong, reliable, long lasting HT lead that’s perfect for use with electronic ignition. These HT leads are resistant to temperature, water, oil and chemical degradation. They meet ISO 3808 quality standard.
- UK made HT Lead
- Double silicone outer with highly conductive carbon ferroflex core
- Extremely strong and durable
- Ideal for use with electronic ignition