IGNITION BUNDLE BUILDER - CHOOSE YOUR OWN OPTIONS:
Use this ignition bundle builder to find the perfect ignition upgrade for your car.
We have tried to offer a great choice for enthusiasts, but if you cannot find what you are looking for, or struggle with the Bundle Builder tool, please contact us.
Please make sure that if you choose a HIGH ENERGY distributor, you also choose a HIGH ENERGY ignition coil.
MG Midget Mk1, Mk2, MK3 and Mk4 Ignition Bundle Builder
Mk1 and MK2 cars used a side entry distributor cap which would have HT leads with no terminals to the distributor cap, as these would push in and secure with a screw underneath. These are our L7 HT Leads.
MK3 and MK4 cars used a top entry distributor cap which has push on terminals. These are our L2 HT Leads.
See table below:
MG Midget Mk1 (1961-64) L7 leads for side entry screw fit cap
MG Midget MK2 (1964-66) L7 leads for side entry screw fit cap
MG Midget MK3 (1966-74) L2 leads for top entry push on cap
MG Midget MK4 (1974-80) L2 leads for top entry push on cap
The MG Midget used the Lucas 25D and 45D Distributors, however a 45D can be used for all years.
It is important that you select the correct HT Leads for your Midget. A 25D can be replaced with a 45D, so if you want to use a 45D with your MK1 or MK2 then please select the MK3 and M4 specification HT Leads.
ABOUT THE POWERSPARK RANGE OF DISTRIBUTORS:
Our points distributors are a complete replacement, with a new set of points housed inside and brand new distributor casting with new distributor cap. OK to use with copper core HT leads.
Looks like an original points distributor but contains a Powerspark Electronic Ignition Module. Not suitable for use with copper HT Leads
High Energy Electronic Distributors (ONLY FOR USE WITH HIGH ENERGY IGNITION COIL)
As above but with 3 x the spark power for race and high performance applications.
ABOUT THE POWERSPARK RANGE OF IGNITION COILS:
Powerspark CS Ignition Coil (CS)
A traditional classic car ignition coil suitable for any points or electronic ignition system. An ideal alternative to the Lucas DLB105 Ignition Coil.
Lucas DLB105 Ignition Coil (DLB105)
A genuine Lucas 3 ohm high performance 12v ignition coil, Lucas part number DLB105.
Viper Ignition Coil (VCS)
A modern high performance dry core 3.0 ohm coil. No sloshing, no dripping, just consistent performance when mounted on any angle.
Powerspark CE Ignition Coil (CE) (ONLY FOR USE WITH A HIGH ENERGY DISTRIBUTOR)
High energy version of the Powerspark CS, with a primary resistance of 1.5 Ohms.
Viper High Energy Ignition Coil (VCE) (ONLY FOR USE WITH A HIGH ENERGY DISTRIBUTOR)
The High Energy version or our popular Viper ignition coil. 0.7 Ohms primary resistance.
Lucas DLB198 High Energy Ignition Coil (ONLY FOR USE WITH A HIGH ENERGY DISTRIBUTOR)
A genuine Lucas DLB198 Ignition Coil, 0.8 Ohms resistance
About Powerspark Double Silicone Performance 8mm HT Leads:
Our HT leads use double silicone insulation surrounding a carbon ferroflex core for maximum spark transfer and minimal power loss.
This combination gives you a strong, reliable, long lasting HT lead that’s perfect for use with electronic ignition.
These HT leads are resistant to temperature, water, oil and chemical degradation.
They meet ISO 3808 quality standard.
- UK made HT Lead
- Double silicone outer with highly conductive carbon ferroflex core
- Extremely strong and durable
- Ideal for use with electronic ignition