K16 - Powerspark Electronic Ignition Kit for Bosch 6 Cylinder 2-Piece Right Hand Points Distributor
This kit is designed to replace the points and condenser inside Bosch 6 Cylinder, Right Hand Points Distributors.
Bosch distributors are either 1 piece or 2 piece construction, and have Left Hand or Right Hand Points Sets.
This ignition kit is designed to replace a two piece piece, right hand points set in Bosch 6 Cylinder distributors.
Suitable for vacuum advance & centrifugal advance distributors.
You can find these distributors in some 6 Cylinder BMW, Mercedes-Benz, and Porsche cars as well as some Ford Mustangs and Volvo-Penta boats.
This kit is suitable for iconic classic cars such as the Mercedes-Benz W108, W111, W114, 220SE, 230S and 300D, amongst others.
If you are unsure about fitment, please contact us
- Easy to install
- Replaces troublesome points and condenser
- No visible difference in your engine bay
- Improved starting
- Improved performance
- Improved durability
- Maintenance free
- To be used with a coil resistance above 1.5 ohms only
- We recommend our Silicone coated carbon core HT Leads instead of copper
Powerspark Electronic Ignition explained in more detail:
The kit uses a simple magnetic trigger and optimises dwell to provide a reliable and consistent spark across the rev range. It is easy to install and maintenance free.
Each kit comprises a baseplate with electronic module, trigger ring and all wiring. The new electronic baseplate mounts exactly where the points and condenser baseplate sat. The kit connects directly to the coil using the wires provided, red to the positive side and black to the negative side. The ignition kit will automatically shut down if the ignition is left switched on without the engine running to prevent component damage.
Powerspark Electronic Ignition Kits are designed to work with a coil resistance above 1.5 ohms, typically 3.0 ohms. Some performance coils operate at a lower resistance and will need the High Energy electronic ignition kit.
Full fitting instructions are included with your kit, and plenty more instructions can be found on our blog.