null
4696

Shopping For

Change

Shop by Category

HT lead Terminals & Boots

At Powerspark Ignition we offer a high-quality selection of HT Lead Connector Terminals and Boots. Click on the tabs below to check out the broad range of products that are for sale, some examples of the products are; Brass HT lead connector terminals, HT lead connector boot, Brass spikes for HT leads as well as many more seen on the website. If you are having trouble with finding the right HT lead connector terminals that you need, be sure tio contact us.

  • Powerspark Brass HT Lead Terminal to Distributor Cap - Straight Powerspark Brass HT Lead Terminal to Distributor Cap - Straight

    HT Lead Distributor Cap Brass Terminal - Straight

    IA_IT111 - Brass HT Lead Terminal to Distributor Cap - Straight This is a brass HT lead terminal which attaches to the distributor cap, designed to be affixed to a HT lead.  You may also need bare ht lead lengths, terminals and boots, HT lead...

    £1.65
    Choose Options
  • Powerspark HT Lead Rubber Boot Straight for Distributor Cap Powerspark HT Lead Rubber Boot Straight for Distributor Cap

    HT Lead Distributor Cap Rubber Boot - Straight

    IA_Straight_Cap_Boot - HT Lead Rubber Boot Distributor Cap - Straight Straight rubber boot to fit over the end of a straight HT lead, at the distributor cap end. You may also need bare HT lead lengths, terminals and boots, HT lead...

    £1.95
    Choose Options
  • Powerspark HT Lead Terminal Straight to Spark Plug Powerspark HT Lead Terminal Straight to Spark Plug

    HT Lead Spark Plug Terminal Straight

    IA_IT103 - HT Lead Spark Plug Terminal - Straight This is a brass HT lead terminal which attaches to the spark plug, designed to be affixed to a HT lead.  You may also need bare ht lead lengths, terminals and boots, HT lead fixing, securing...

    £1.65
    Choose Options
  • Powerspark Rubber Boot for HT Leads Spark Plug Terminal Straight Powerspark Rubber Boot for HT Leads Spark Plug Terminal Straight

    HT Lead Spark Plug Rubber Boot - Straight

    IA_Straight_Plug_Boot - HT Lead Rubber Boot Spark Plug - Straight Straight rubber boot to fit over the end of a straight HT lead, at the spark plug end. You may also need bare HT lead lengths, terminals and boots, HT lead fixing, securing...

    £1.95
    Choose Options
  • Powerspark Rubber Boot for Cap - Angled Powerspark Rubber Boot for Cap - Angled

    HT Lead Distributor Cap Rubber Boot - Angled

    IA_Angled_Cap_Boot - HT Lead Rubber Boot Distributor Cap - Angled 90 degree angled rubber boot to fit over the end of an angled HT lead, at the distributor cap end.   You may also need bare HT lead lengths, terminals and boots, HT...

    £1.95
    Choose Options
  • DT1000 Male Pin Distributor End Terminal HT Lead M4 End Powerspark DT1000 Male Pin Distributor End Terminal HT Lead M4 End Powerspark

    DT1000 Male Pin Distributor End Terminal HT Lead M4 End

    50mm long galvanised distributor end terminal. Straight, bendable right-angle for male PIN applications. Inside diameter of clip is 4mm. If selecting this to make your own leads, please select the angled cap rubber boot from our selection. This will...

    £2.85
    Choose Options
  • Powerspark Rubber Boot for Spark Plug - Angled Powerspark Rubber Boot for Spark Plug - Angled

    HT Lead Spark Plug Rubber Boot - Angled

    IA_Angled_Plug_Boot - Rubber HT Lead Boot for Spark Plug - Angled This is the rubber boot cover which goes over the spark plug on the HT lead, angled at 90 degrees. If you were looking for a straight spark plug boot, you can find it here. You may also...

    £1.95
    Choose Options
  • Powerspark Spark Plug HT Lead Terminal - Angled Powerspark Spark Plug HT Lead Terminal - Angled

    HT Lead Spark Plug Terminal Angled

    IA_IT118 - HT Lead Spark Plug Terminal - Angled This is a brass HT lead terminal which attaches to the spark plug, designed to be affixed to a HT lead.  You may also need bare ht lead lengths, terminals and boots, HT lead...

    £1.50
    Choose Options
  • Powerspark HT Lead Terminal Acorn Type Push Fit for Distributor Coil Powerspark HT Lead Terminal Acorn Type Push Fit for Distributor Coil

    HT Lead Terminal Acorn Type Push In Fit

    IA_HT13 - Spark Plug HT Lead Terminal - Acorn Push-In Brass Terminal for 7mm Lead  This terminal is used in conjunction with the screw-in Acorn connector on the end of an HT lead. The Acorn goes over the lead, this brass terminal is pushed into the...

    £1.65
    Choose Options
  • Powerspark Cap HT Lead Terminal - Angled Powerspark Cap HT Lead Terminal - Angled

    HT Lead Distributor Cap Brass Terminal - Angled

    IA_IT35 - HT Lead Distributor Cap Brass Terminal - Angled This is a brass HT lead terminal which attaches to the distributor cap, designed to be affixed to a HT lead.  You may also need bare ht lead lengths, terminals and...

    £1.50
    Choose Options
  • Powerspark Acorn - Lucas Type Short Powerspark Acorn - Lucas Type Short

    Acorn - Lucas Type for Cap - Short

    IA_HT2 - Acorn - Lucas Type for distributor cap - short There are two types of 'acorn' screw on connection for HT leads and ignition coils, a 'short' and 'long' acorn. This is the shorter variant, please ensure you are ordering the correct item for...

    £1.50
    Choose Options