D6 - Powerspark Lucas 45D6 Distributor Electronic High Energy 6 Cylinder
The Powerspark 45D6 distributor is a direct replacement for your Lucas 22D6 or 45D6 distributor.
This high quality reproduction has been selling for over 15 years. The advance curve is specific to 6 cylinder vehicles.
We offer this distributor in Points, Electronic and High Energy versions as well as positive earth.
Points versions come with a brand new points set inside. Electronic variants come with the patented Powerspark Electronic Ignition module inside to make running and starting easier and smoother.
A non vacuum variant is also available, which is more suitable for race and track vehicles.
With racing cars, optimum performance of the engine at high revs is more important than fuel economy or running while cold and under very little load, which is why a non-vac distributor is used. Without the vacuum components and weights, a non-vac distributor is less complicated to maintain and easier to time. Only use a non-vac distributor if you are certain that is what you require.
Well known models that used the Lucas 45D6 include the Aston Martin DBS and Jaguar E Type + XJ.
Our Powerspark Lucas 45D6 distributors are are available as follows:
Fitment of the Lucas 45D6 6 Cylinder Distributor includes and is not limited to:
Aston Martin DBS 4.0 1966-72
Austin Princess 1976-82
Daimler 420 1963-70
Daimler 2.8, 5.3 1969-86
Daimler Coupe 1973-77
Daimler Limousine 1968-91
Jaguar 240 1968-69
Jaguar XK 140 1954-57
Jaguar XK 150 1957-61
Jaguar E Type 4.2 1966-75
Jaguar XJ 2.8, 4.2 1969-75
Land Rover 88 / 109 2.6 1966-80
MG C / MG C GT 3.0 1967-69
Rover 75 1954-59
Rover 90 1955-59
Triumph 2500 1974-77
Triumph GT6 1966-73
Triumph TR5 1967-76
Triumph Vitesse and Vitesse Cabriole 1962-71
TVR 2500 1972-77
Wolseley Six 1972-75
About Points, Electronic, High Energy and Positive Earth Distributors from Powerspark Ignition:
Traditional Points Distributors:
The traditional ignition system used in most cars up until the 1980s.
- To be used with a Standard or Sports ignition coil, resistance reading above 1.4ohms. OK to use copper HT Leads
Standard Electronic Ignition Distributors:
Looks like an original points distributor but contains an electronic ignition module
- To be used with a Standard or Sports ignition coil, resistance reading above 1.4ohms. Not suitable for use with copper HT Leads
High Energy Electronic Ignition Distributors:
Looks like an original points distributor but contains an electronic ignition module capable of 3x the spark of standard electronic ignition.
- To be used with a Standard or Sports ignition coil, resistance reading less than 1.4ohm. Not suitable for use with copper HT Leads