K7 - Powerspark Electronic Ignition Kit for Lucas 45D 6 Cyl Distributor
K7 & R2 - Powerspark Electronic Ignition Kit for Lucas 45D 6 Cyl Distributor
This kit is designed to replace the points and condenser inside a Lucas 45D 6 Cyl Distributor as fitted Austin, Daimler, Jaguar, Land Rover, Rover, Triumph, TVR, and Wolseley 6 Cyl engines.
Suitable for some very well known classic cars such as the Jaguar XJ6 ,Rover SD1 and TVR 2500, amongst others.
It is a complete kit to convert your car to electronic ignition, including a Powermax moulded Red Rotor Arm. Fitting is easy and instructions are included with the packaging, as well as available online.
Electronic ignition will give your classic car better starting and smoother running.
Powerspark Electronic Ignition Kit - Replacement baseplate with electronic module, trigger ring and all wiring.
Powermax Red Rotor Arm - A moulded rotor arm unit designed to be stronger and more reliable than the original riveted unit. Riveted rotor arms are known to loosen and break apart over time - the Powermax moulded arm is a no compromise replacement.
- Easy to install
- Replaces troublesome points and condenser
- No visible difference in your engine bay
- Improved starting
- Improved performance
- Improved durability
- Maintenance free
- To be used with a coil resistance above 1.5 ohms only
- We recommend our Silicone coated carbon core HT Leads instead of copper
Powerspark Electronic Ignition explained in more detail:
The kit uses a simple magnetic trigger and optimises dwell to provide a reliable and consistent spark across the rev range. It is easy to install and maintenance free.
Each kit comprises a baseplate with electronic module, trigger ring and all wiring. The new electronic baseplate mounts exactly where the points and condenser baseplate sat. The kit connects directly to the coil using the wires provided, red to the positive side and black to the negative side. The ignition kit will automatically shut down if the ignition is left switched on without the engine running to prevent component damage.
Powerspark Electronic Ignition Kits are designed to work with a coil resistance above 1.5 ohms, typically 3.0 ohms. Some performance coils operate at a lower resistance and will need the High Energy electronic ignition kit.
Full fitting instructions are included with your kit, and plenty more instructions can be found on our blog.